Home > showlist
If you have tried to start your car and you hear a clicking noise and it isn’t starting you may need a new starter relay. The starter relay is a switch that makes connects you’re the battery to your Starting Motor Starter when you turn the key. Starter Relay Read on to discover how a starter relay works in your car to make it run.
A Corki starter relay is a very important part of your car's electrical system. It controls the number of volts the battery sends to the starter motor. Why the Starter Relay is Vital No starter relay no power to your engine. The starter relay does its job by transferring power from your car’s battery to the starter motor.
When you turn the key in the ignition, the starter relay gets a signal from the ignition switch. The relay, in 12, is depowered by the battery (D) which is applicable to the starting motor. The starter motor rotates the engine to facilitate starting.
Like anything else that has its place on a vehicle the starter relay can get worn. Below are some ways of issues a bad starter relay that you should be aware of. If you turn the key on the ignition and nothing happens, if you the car does not crank at all, or you hear clicking sound but the car doesn’t crank, then it is likely a symptom of bad starter relay. You may also have trouble getting your car going, or it starts and then stalls.

Why Is Corki starter relay 12v Important? Starter relay is important because it also involves with starting your car. Your engine wouldn’t run without the solenoid because the electrical current from the battery wouldn’t get to the starter motor. It's the starter relay that controls power to the starter motor; see to it that it not only sees that the ignition switch and the push button are both started at the same time. This saves the electric starter motor and other electric components from wear.

How to Test a Starter Relay in a Ford Escort If your relay is no good, then the whole relay board must be replaced. These can cook themselves then. Relay location could be different but apply the method for the brake relay testing.

If you have reason to believe your Corki 12v starter relay is not catching, there are a couple other tests you can perform prior to replacing it. The first thing to check is the battery, to confirm that it is charged and functioning correctly. A bad battery weak or dead can cause symptoms that mimic a bad starter relay. Then inspect the wires and connections to the starter relay to verify they are clean and tight and not rusty. If these troubleshooting solutions do not work, you’ll need to replace your starter relay.